BUMPER CRYSTAL 80ml

Product ID: 699-008

1-year durability, glass coating agent for unpainted plastic parts & bumper

 

----------

Content

BUMPER CRYSTAL 80ml x1 (Use quantity : 8ml/car)

----------


You must Log in to see price and enable order to this product


 
 
 
Restore the original luster of the mall!

Parts degraded and turned white can be restored.


Protected by a film-forming rigid glass. No degradation!
 
 
 
Restore the original luster of the mall bumper!!

This product “BUMBER CRYSTAL” is a ultra-hard glass coating for bumpers to restore plastic surface.
It is different to polishing products. It has been developed specifically for bumpers to restore original luster.

It is easy to be applied evenly for everyone to use.By using legacy precuts, the bumper became white again after time has passed.

The “BUMPER CRYSTAL” keeps the luster for long time by creating clear glass coating.

The product is only sold online.
If you have used other products but not satisfied, you may find this product different to others.
 
 
 
The glass coating protects bumpers from degradation

  Most of bumper polishing products (whether for personal or business use) use petroleum as main ingredient.
Petroleum-based solvents (close to the tire wax) will get oxidation.

The film coating which degraded by oxidation will eventually removed by rain.Furthermore, the coating not removed properly can create bad oil film. This condition can be worse than before applying the polishing products.

“BUMBER CRYSTAL” is a mineral hard glass coating. It will not have oxidation and deterioration.
 
 
One application lasts for 6 months!

Glass base bumper coating will not cause oxidation and deterioration.
Both hydro-repellent and gloss will last more than six months from the application.
With the hard coating, it will be difficult to scratch and with water repellent, you will enjoy washing your car.


Bumper with discoloration with age

After application restored colour and luster
 
[Attention]
  • The product is for rough unpainted plastic materials, such as malls and bumper.
    It cannot be used on clear materials such as door visor and headlight.
  • It cannot be used for soft materials. It may cause cracks.
  • If the application is too thick (by one application), it may create cracks.
  • After the application, please wipe off the surface. Do not leave the application without wiping.
  • Please clean your car before application. If you apply this product on top of dirt, they cannot removed after the application.
  • The coating is very strong. It will be impossible to remove the coating when it is cracked or containing dirt.
  • Please avoid using the product in the heat such as in direct sunlight. Please also make sure the application surface is not too hot.
  • It will take approximately 6 hours to dry. Please do not drive the car and avoid the car getting wet.
  • The product will harden when contacting air.You cannot keep the product for long time after opening. Please finish using the product by applying 2-3 times. This will be very effective. Please read the instructions carefully before using.
 
 
  モールクリスタル施工写真1
【1】 Wash away dirt,sand and mud with a strong water flow.
 
  モールクリスタル施工写真2
【2】 Wash well with detergent such as "BODY CLEAN" to avoid leaving dirty.
     
  モールクリスタル施工写真3
【3】 Wipe and dry the surface without leaving water.
 
  モールクリスタル施工写真4
【4】 Please use the coating as thin as possible to avoid drips after impregnating the liquid into the sponge.
*Please impregnate the liquid deeply to the edges of coating sponge.
     
  モールクリスタル施工写真5
【5】 Wait for 2 or 3 minutes after coating and wipe off with the cloth before full cure.
 
  モールクリスタル施工写真6
【6】 Check if there is any liquid on the surface.If there is,please wipe that.
 
 
 
Batch Information
[BUMPER CRYSTAL]
Application: coating chemical for plastic bumper and mall
Liquid: Neutral
Ingredients: Organosilane compounds, aluminum chelate, n-hexane
 
 

 

tejun-1.jpgtejun-2.jpgtejun-3.jpgtejun-4.jpg